Undefined identifier: mib-2 near line 88 of IDENTIFIER: At line 6 in /usr/share/snmp/mibs/SNMPv2-SMI.mib Line 6 in /usr/share/snmp/mibs/SNMPv2-SMI.mib NEW ISSUES NOW AFTER PLACING THE MISSING MODULE IN /usr/share/snmp/mibs: MIB search path: /home/user/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf:/usr/share/mibs/site:/usr/share/snmp/mibs:/usr/share/mibs/iana:/usr/share/mibs/ietf:/usr/share/mibs/netsnmpĬannot find module (SNMPv2-SMI): At line 13 in /my_MIB_Files/abc.mib
I am getting the following error messages: provided the +/my_mibs_files/ as an parameter with snmpwalk like:.Provided my mibs folder in the /etc/snmp/nf file such as:.To remove the dependencies, I tries following solutions, but none was working: I thought may be abc.mib is using other mib files. Ideally, I want to do the snmpwalk on all my mibs folder using the following command, which is not working.
#HP ILO 4 MIB DOWNLOAD HOW TO#
Can you please assist me how to address the following error messages?
The following is the error messages I am getting. I keep getting the error messages when running the command snmpwalk on the Ubuntu OS which is using net-snmp.
14.13 (CPQHLTH-MIB::cpqHeResMem2ModuleTable) instead.I searched intensively and applied available solutions from google, all these solution did not fixed the problem. Depending on hardware model, the information may be at. 1.3.6.1.4.1.232.6.2.14.11 (also known as CPQHLTH-MIB::cpqHeResMemModuleTable) should contain the status of individual DIMMs.
#HP ILO 4 MIB DOWNLOAD CODE#
The System Insight Display is primarily a troubleshooting tool for major hardware failures that prevent the server from running even firmware code correctly.įor monitoring memory over SNMP, the contents of the CPQHLTH-MIB will probably help: The iLO4 can also access the Integrated Management Log (IML), which may provide similar data in another form. With iLO4, some of this information may also be accessible in SNMP format over the iLO network connection, because the iLO4 firmware does a similar translation. Some of this information is made available to the OS by the appropriate hardware health drivers, and then translated into SNMP format by the SNMP agent. The System Insight Display gets its information directly from the hardware: on older systems you may have had diagnostic LEDs on the system board instead. The newest iLO4 may have more SNMP functionality, I haven't checked that yet. Other than that, the only things to configure are to enable iLO SNMP passthrough and set the iLO SNMP trap destination settings, if it has them. of this document suggests that you can set the trap destination on the main server OS SNMP agent to 127.0.0.1 to have the traps sent out through the iLO interface only: This would include all the traps that the SNMP agent of the main server OS can send.
#HP ILO 4 MIB DOWNLOAD DRIVERS#
So whatever MIBs are applicable to the main server should be applicable to iLO SNMP passthrough access too.Īpparently the outgoing SNMP traps are automatically sent through both the regular NIC and the iLO interface, if the appropriate HP SNMP agents and iLO drivers are installed. SNMP queries sent to iLO are passed to whatever SNMP agent is running on the main server OS. They only have a SNMP Passthrough functionality, i.e. ILO, iLO2 and iLO3 don't have a complete SNMP stack.
0 kommentar(er)
